
Start with the two ports you need to connect. Some Starlink kits carry power and data on the antenna cable. Others use a separate DC lead and an Ethernet cable. At TGS, we identify the cable by its endpoints, the kit model and the length of the run.
Identify the kit
Read the model labels on the antenna, router and power supply. A kit with Router Mini could be Standard 4, V5 or Mini X, depending on the antenna and power arrangement. For a replacement enquiry, record the kit name, any model code on the label and the connection at each cable end.
Standard and V5
- Standard 4 X with Router 3 uses a 15 m antenna cable to the router. The Router 4 version uses 15 m from antenna to power supply and a separate 2 m cable from the power supply to Router 4. Standard 4 uses a 15 m antenna cable to its Dual PoE supply and a separate 2 m Ethernet cable from that supply to Router Mini. A 45 m replacement antenna cable is available for Standard 4 and 4 X.
- Standard Actuated, often called Gen 2, uses a 15.2 m (50 ft) antenna-to-router cable. Complete replacement cables are available in 22.9 m and 45.7 m. The optional Ethernet Adapter adds a wired network connection to Router 2.
- V5 ships with a 15 m antenna cable, a separate 2 m Ethernet cable, a Dual PoE supply and Router Mini. Confirm replacement parts against the V5 kit.
Mini and Mini X
Both kits include a 15 m DC power cable. Mini X adds a Router Mini with its own power supply. The separate 15 m Mini RJ45 accessory carries Ethernet to another network device. The Mini’s IP67 rating depends on a sealed connection at the device port. Its 5 m USB-C-to-barrel accessory is a power option for the Mini antenna and requires a USB Power Delivery source rated 100 W (20 V, 5 A). Keep the USB-C end indoors.
Enterprise and Performance
Enterprise includes a 50 m detachable antenna-to-power-supply cable and a separate 5 m Ethernet link to the router. Performance Gen 1 and Gen 2 use 8 m or 25 m antenna cables, with a maximum of 25 m from antenna to power supply. For Performance Gen 3, the antenna cable comes in 5 m, 25 m and 50 m lengths, with 25 m in the kit. Match both ends to their designated ports on the Performance equipment.
The original Standard 4 X antenna cable has 34.9 × 13.1 mm connector bodies, eight straight-through pins, a shield and a drain wire. The original Performance Gen 3 antenna cable for maritime installations uses four twisted pairs in a Cat 5e F/UTP construction, with a minimum bend radius of 50 mm. Check these details against the exact cable being replaced.
Legacy Standard Circular
The round Standard antenna uses a fixed 30 m cable to its power supply and a separate 2 m Cat5e link between the power supply and router. Identify which segment needs service when requesting a replacement.
Confirm before ordering
Send us the exact kit model, photos of both plugs and mating ports, cable length, installation conditions and quantity. If you have a drawing or sample, include it. We use those details to check fit, pin assignment, sealing and power delivery before we quote. Request a cable quote.
