Cable resistance matters most when the operating voltage is low, the current is high or the circuit extends beyond the original layout. Consider an illustrative DC link that carries 10 A and has a calculated cable loop resistance of 0.10 Ω. The voltage loss in the cable is 1.0 V and the conductor power loss is 10 W under those assumptions. That calculation says nothing by itself about allowable current or protective-device selection, which remain engineering decisions for the complete circuit.

Price on the same calculation

Send the same operating current, route length and design temperature to suppliers. Request the conductor’s maximum DC resistance and its reference temperature in writing. The positive and negative paths can have different lengths, so calculate the resistance of each before adding them. Connections can also contribute appreciable resistance on a short, high-current lead.

Ask the factory for measured evidence

In an enquiry to TGS, specify the construction and the intended voltage-drop budget separately. For a long extension size, request the finished assembly's end-to-end resistance and a description of test conditions. For bulk wire, compare measured resistance per unit length and retain the test record against the approval sample. This creates an acceptance limit that your receiving team can apply to another shipment.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS