Buyers often move from 4 mm² to 6 mm² after a route grows longer or the allowable voltage drop gets tighter. The decision starts with the current and route from the electrical design. A larger cross-section normally lowers resistance for comparable conductor designs, but it also increases material cost and can change the outside diameter and bending characteristics.

Check the assembly dimensions

A connector family can have several contacts or seals under similar order codes. Check that the housing, contact and gland support the proposed conductor construction and actual cable diameter. A 6 mm² conductor can fit the contact while its cable jacket falls outside the specified seal range. Have your engineering team review both numbers on the same drawing before approving cut leads.

Compare comparable quotations

Ask a supplier in Vietnam to price the 4 mm² and 6 mm² candidates at the same reel length and destination. Show the designer the resistance data and the buyer the freight weight so both can see the impact of the change. If the larger cable is justified only on long runs, price a mixed size order. Our H1Z2Z2-K guide can help identify the cable family before you send the detailed specification.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS