A buyer planning a satellite setup may want an indoor router several metres away from the terminal. With Starlink Mini, the relevant data connection is the RJ45 Ethernet port. Starlink describes its Mini Ethernet accessory as the way to protect the dish-end connection against water ingress and says the Mini loses its IP67 rating with a standard third-party RJ45 cable. The choice for a protected indoor link and the choice at an exposed terminal can therefore be different.
Identify both ends of the requested link
Record the terminal model, the indoor router or switch and whether the connection is at the dish or further downstream on a local network. Ask the installer to check plug and boot clearance around both ports. State the cable route, the required data performance and the environment. Retain manufacturer-specified terminal accessories wherever the device requirements call for them.
Quote the cable the factory can evaluate
A Vietnam cable assembly enquiry can specify a custom indoor network lead or another clearly defined part of the installation. Give TGS the measured distance, the required category and the installed connector geometry. Ask for sample fit and the applicable network test results before agreeing on the PO. Keeping the exposed equipment interface separate from indoor cabling makes it easier to describe exactly what is being offered.
Discuss your cable order with TGS
TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.
Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.
