A portable system can perform on the bench and behave differently on the vehicle rack. A long DC run adds resistance, and a higher current produces a larger drop along the cable. The equipment needs enough voltage at its own input under the intended operating conditions. Use the supported power arrangement from the equipment documentation as the baseline. Production buyers should ask for electrical data for the intended length before approving a custom auxiliary cable.

Start with the voltage at the equipment

Estimate the load current and conductor loop resistance as a first step. Then verify the voltage at the equipment end under the planned load with appropriate engineering support. An illustrative loop resistance of 0.20 Ω would produce a 1 V drop at 5 A, even before including connector losses. Low input margin can make that consequential. Also consider the operating temperature and the performance requirements for the actual equipment and source.

Make cable resistance measurable at release

Ask a Vietnam cable assembly supplier to show the conductor size, length tolerance and end-to-end resistance under stated test conditions. Agree what will be checked on each assembled unit and what is reserved for sample qualification. Separately identify original equipment leads specified by the terminal maker. A clear power requirement makes it possible to compare offers for custom parts of the kit.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS