An installer can spend almost all of a link’s distance budget on the permanent cable and later add long cords at both ends. For conventional structured copper Ethernet channels, 100 m is a common design limit for the complete channel, with up to 90 m for the permanent link under typical design assumptions. Check actual standards, cord construction, operating environment and equipment requirements before applying those figures to a specific site.

Count the route and the cords together

Draw the link from active equipment through the fixed cabling, then add the cord at each end and any connections along the path. Different patch cord constructions can change the allowable channel layout. If a satellite terminal uses an exposed accessory with its own restrictions, keep that link separate in the plan. Apply the network length budget to the appropriate LAN channel.

Approve finished lengths for repeated installations

A Vietnam enquiry can fix a short group of measured patch cord sizes for racks and work areas. Ask how the factory measures the length and marks it on the package. Test the complete channel when commissioning calls for it and obtain the component evidence specified for the cords. This gives installers known parts for future changes and spares.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS