A cloverleaf connector is the familiar name for the grounded IEC C5 form used on some adapter bricks and compact equipment. Start with the IEC C6 inlet designation or the equipment drawing. A manufacturer needs to understand the two mating parts and how the finished cord routes around the enclosure.

On a compact bench setup, the plug might need a shorter cable exit to fit between the charger and a divider. A cutaway drawing or a verified sample from the intended installation makes the maximum connector envelope easy for the factory to review.

Check both electrical and mechanical requirements

Confirm the ground path and market ratings on the approved design. Record the connector shell maximum dimensions, cable exit and available space to handle the connector. If the brick sits in a cable tray, verify that the connector can be inserted and removed without straining the assembly. Include how the length will be measured and label the original cable used as reference.

Set up repeatable pack-out

A distributor can request the same connector family with a market-specific mains plug selected for each country. Keep separate part codes and carton markings. For a Vietnam factory quotation, list stock quantities and the pack format, then verify one assembled sample per finished article. That sample should document how the connector seats, how the cord bends leaving the brick and what appears on the jacket or tag.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS