A conduit can look dry when the electrician installs it. Later, water or condensation may occur within the raceway. The engineer should classify the route under the rules for the project and choose a suitable wire or cable. Give the supplier the intended location and the designation so the certified construction can be checked in the quote.

Ask for the markings early

A supplier might offer building wire with several marks printed on the same insulation. Request the wire print and relevant documentation for the voltage and conductor size ordered. Verify the size and outside diameter against the project’s pulling and termination requirements. Where part of the run is outside the conduit, check the additional exposure and protective conditions separately.

An exterior raceway can be bought as one project and still require multiple continuous lengths. Identify the zones where moisture governs material choice. Send the installer’s cutting schedule with the pack format it can stage and the marked designation the customer expects.

Check the pull schedule before the reels are made

List all continuous lengths and colors by pull group. Confirm which reel identifiers will be used at dispatch. Use TGS THWN-2 as a starting point when the project design calls for that designation. Send the route, destination and exact wire schedule to support a Vietnam factory production offer.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS