A right-angle USB-C plug can keep a cable close to the wall of a kiosk or the side of a device. A drawing that says only “90 degrees” leaves the direction open. The lead may run across a neighboring port, interfere with a case or leave the cable bending where it exits the overmold.
Draw the cable in the installed position
Show the device face and the direction the cable must exit. Dimension the overmold against the enclosure opening, especially for rugged cases with recessed ports. Try the sample in both plug orientations if the enclosure allows them. Ask the equipment team to remove the cable using the overmold so the sample review also checks how much space a user's fingers have.
Verify performance in the chosen shape
The angle and available molding space affect how the supplier routes conductors into the plug. Include charging and data requirements in the same revision as the envelope drawing, then test the final length. Use your approval sample to show the packing team what orientation belongs in each box. TGS can review custom cable ends and repeatable pack-out from Vietnam when the connection, orientation and enclosure clearance are documented.
Discuss your cable order with TGS
TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.
Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.
