A loose plug can be a nuisance in the office and a costly service call inside a field enclosure. Before specifying a locking DC cable, check how equipment is mounted, whether cables move with the enclosure and how technicians are expected to disconnect the device for service.
Match the existing locking system
A thread pitch, latch profile or keyed face belongs to the connector pair. Obtain the mating part number and install a sample in the actual case. Check the room a technician has for fingers or a tool, including any panel fasteners or adjacent connectors. Agree on the retention requirement and how it will be measured. If the installation also needs sealing, verify the included components and test the assembled pair under those conditions.
Protect the cable after the plug locks
A locked connection transfers force into the cable and equipment jack. Ask where the cable will be supported and how the strain relief is supposed to behave when a panel opens. Provide the routing envelope, working voltage, current and any motion expected in service. TGS can review the connector and molded transition with a Vietnam production team when the fixture, test and approved mating hardware are part of the request.
Discuss your cable order with TGS
TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.
Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.
