In a compact PC case, a graphics-card power cable can fit the connector on the bench and then get pushed sideways when the side panel closes. Check the fully assembled chassis at the start of the cable project. Include the graphics card, the power supply and every part that shares the space near the connector.
Document the actual connector system
Use the manufacturer-approved configuration for the GPU and PSU. A drawing for a 12V-2x6 assembly should identify the power and signal positions, the approved mating parts and any connector-specific seating checks. Some other PCIe power interfaces use different connectors. Confirm the exact power supply wiring before reusing an internal harness across PC platforms.
Approve the bend in the assembled case
Follow equipment instructions for cable routing and bending near the plug. Check that the latch engages fully with the panel installed and verify the mounting clearances across the cases in the program. Ask the supplier for the qualification and inspection plan for terminals and crimped joints. TGS can review a Vietnam harness request when the engineering team provides the connector drawings, fit evidence and approved electrical test criteria.
Discuss your cable order with TGS
TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.
Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.
