A working harness pulled from a prototype gives a factory something it can hold. A production drawing gives it something it can measure. Begin by capturing both connectors, the installed route and the order in which the assembly is fitted into the device. Include any ties or clips the installer depends on after the harness is inside the housing.

Release the pinout with the mechanical drawing

List cavities, wire types, splices, shield connections, branch lengths and the orientation of plugs. Number the connector views so the factory and buyer agree which side is shown. Match a material or approved alternate to each terminal and connector family. Agree on tolerances at the points that determine whether a cover can close or a connector can be reached.

Check production against the same fixture

Use an approved electrical test that catches swapped pins, open positions and shorts, and set the mechanical sampling method for terminals and retention. Ask how evidence is linked to the harness lot and drawing revision. The TGS guide to custom cable and wire harnesses explains how to start the factory discussion. Include expected volume so Vietnam assembly and tooling quotations reflect the program size.

Discuss your cable order with TGS

TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.

Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.

TGS CABLE in Yellow Page · TGS Cable In KOMPASS