A 12 V accessory that works beside the power supply can fail when the buyer moves it across a vehicle or cabinet. As the cable gets longer, resistance rises and the voltage reaching the load falls. A device with a brief startup surge can expose the problem even if the stock cable seemed fine in normal operation.
Budget the drop at peak load
Use the full outgoing and return conductor path when estimating resistance, and allow for the plugs and terminals. For illustration, a loop resistance of 0.2 ohms drops 0.6 V at 3 A before accounting for connector losses. The device's allowed input range determines whether that is acceptable. Ask for measured resistance and a loaded check on the final length.
Quote a useful range of lengths
Learn which routes customers install most often and quote those lengths separately. A longer lead may need a different conductor size and a larger termination. Ask the factory to identify the cable on the tag and support different boot tooling where needed. Give TGS the device data and route conditions when looking at 12 V assemblies from Vietnam. That information makes the cable quote comparable by delivered performance.
Discuss your cable order with TGS
TGS manufactures power cords and power cables in Vietnam for international buyers. Our team can review the cable build, connector assembly and export packaging together. See our custom cable and harness capabilities if you are sourcing a build to drawing.
Send a factory enquiry for a finished cord or custom build. Use the quotation tool for supported bulk cable sizes. Email ken@tgscable.com, call (+84) 868 848 620 or connect on WhatsApp, Zalo or WeChat.
