Large feeder reels tie up more cash in copper and may hit receiving or container weight limits before space runs out. Set the comparison per delivered, approved run. Request independent copper and aluminum configurations and write the estimated duty for each beside its classification, additional measures and any aluminum remedy review. Add the reels and lift equipment required at receiving. A quote can win per foot at the factory and lose per installed run when it leaves too much excess cable on the reel.
Which SER specifications affect the quote?
A representative order could be a 600 V SER assembly sold by reel, with separate copper and aluminum configurations. Before locking the order, list the neutral and ground construction, conductor metal and size per conductor in the landed-cost request. Pass the same drawing to the broker and the product approval team. Ask the supplier to price each approved construction and packing basis on its own line.
Which cost differences belong on the worksheet?
Use 17.8% as an illustrative U.S. duty subtotal only if the selected SER is confirmed under the ordinary bare-ended copper line 8544.49.30 at 5.3% and is subject to the 12.5% July Section 301 duty for Vietnam. Treat any different voltage, fitted connector or conductor metal as a separate classification decision. The broker should confirm the duty figures on the entry facts before the purchaser approves a comparison.
Use the same customs value basis, quantity, currency, destination and date for both bids. Show duty dollars beside each Chapter 99 provision and account separately for freight, brokerage and other fees. Then divide the landed total by accepted saleable feet or metres. A difference in reel count, tested usable length or packaging allowances can outweigh a small rate gap. Keep a second scenario for a later entry date so a change in duty does not turn an otherwise sound purchasing decision into a margin problem.
What would make the Vietnam offer easier to buy?
Have the plant confirm a sample or drawing revision before it prices the full order. For SER, ask for the proposed legend, certified construction where the destination requires it, lot testing documents, the number of feet or metres per coil and the total pallet dimensions. Add any cut-length tolerance and the acceptable reel or carton type to the purchase order. A sample pack is useful when the buyer sells by individual coil or has a receiving constraint.
For a Vietnam factory bid, compare SER specifications and request a factory quotation for SER. Include the destination, quantity, required marking and packaging. The most useful response for a tariff review is a drawing and a product description that match the same configuration on the invoice and packing list.
